LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 419 (Steering System) >> Removal And Installation >> Power Steering Reservoir

Power Steering Reservoir

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Removing Power Steering Part
    G03200274Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
  3. Fill and leak test the system. For additional information, refer to POWER STEERING SYSTEM FILLING  in this section.

Item 2: Lower Reservoir Isolator Bolt Removal Note 

  1. Loosen the bolt and detach the reservoir from the isolators.