LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Anti-Lock Control) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Tests >> PINPOINT TEST B: DTC B1483 - Brake Pedal Input Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

The operating voltage required to supply the pedal travel switch (PTS) switch is 5 volts through circuit 7-CF65 (YE/VT).

The PTS signal is sent through circuit 8-CF65 (WH/VT) to the ABS module.

Ground is provided through circuit 9-CF65 (BN/WH).

scientia non olet · About LEMON Manuals