Recalling a Stored Adjustable Pedal Position

Once the driver has stored a preferred adjustable pedal position, the driver can recall the setting by pressing the corresponding memory switch, or by using a programmed remote keyless entry transmitter. Recalling a stored adjustable pedal position can be accomplished by doing the following:

• The driver can recall a preferred adjustable pedal position by pressing one of the memory recall switches. Pressing memory switch No. 1 will initiate a recall of the adjustable pedal position stored in memory No. 1. Pressing memory switch No. 2 will initiate a recall of the adjustable pedal position stored in memory No. 2.
• A remote keyless entry transmitter can be used to recall previously set memory positions. The remote keyless entry transmitters are manufactured with an assigned personality number (No. 1 or No. 2). The remote keyless entry transmitter assigned with personality No. 1 is capable of recalling only memory position No. 1. Similarly, the remote keyless entry transmitters assigned with personalities No. 1 and No. 2 can recall memory positions No. 1 and No. 2 respectively.
• Memory recall occurs when the UNLOCK switch is pressed on the remote keyless entry transmitters. A second press of the UNLOCK switch, which unlocks the passenger doors, does not initiate a memory recall.
• A memory recall in progress does not prohibit the initiation of another memory recall; the most recently requested memory recall will be executed. For additional memory system information, refer to MODULE COMMUNICATIONS NETWORK .