LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Exterior Lighting System) >> Diagnosis & Testing >> STOPLAMPS >> Inspection & Verification

Inspection & Verification

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION

    Mechanical Electrical
    • Multifunction Switch
    • Battery Junction Box (BJB) Fuse 1 (50A)
    • Central Junction Box (CJB) Fuse(s):
      • 9 (7.5A)
      • 13 (20A)
    • Circuitry
    • Bulbs
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom and refer to the SYMPTOM CHART .