LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 399 (Instrument Cluster System) >> Diagnosis & Testing >> Component Tests >> Gauge Test - Magnetic Gauge Test

Gauge Test - Magnetic Gauge Test

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The Instrument Gauge System Tester is used to diagnose concerns with the instrument cluster magnetic gauges.

To test the magnetic gauges:

  1. Disconnect the connector from the appropriate sender and connect the signal wire to the Instrument Gauge System Tester.
  2. Turn the vehicle ignition switch lock cylinder to the ON position.

scientia non olet · About LEMON Manuals