LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (Manual Transmission) >> Disassembly & Assembly Of Subassemblies >> Reverse Idler Gear >> Disassembly

Reverse Idler Gear: Disassembly

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the reverse idler gear.
    1. Remove the reverse idler gear retaining ring.
    2. Remove the spacer.
    3. Remove the reverse idler gear.
    4. Remove the reverse idler gear bearing.
    5. Remove the reverse idler gear thrust washer.
    Fig 1: Disassembling Reverse Idler Gear
    G02153661Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals