LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 391 (Engine System -- General Information - Ranger) >> General Procedures >> Connecting Rod - Piston Pin Side Clearance

Connecting Rod - Piston Pin Side Clearance

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
    • Refer to appropriate ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to appropriate ENGINE article for the procedure.
    Fig 1: Measuring Connecting Rod Piston Pin Side Clearance
    G03435317Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals