General Specifications
WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification | |||
|---|---|---|---|---|
| Lubricants & Sealants | ||||
| Ford Black Silicone Rubber F4AZ-19562-B | WSE-M4G323-A1 | |||
| Motorcraft SAE 80W90 XL-80W90-QL Thermally Stable 4x4 Axle Lubricant | WSP-M2C197-A | |||
| Lubricant Fill Level Checks | ||||
| Front Axle - L (pint) | 1.54 (3.25) | |||
| Lubricant Level - mm (in) | 9.56 (0.38) Below Bottom Of Axle Cover Filler Hole | |||
| Backlash Specifications | ||||
| Ring Gear Backlash - N.m (inch) | 0.13-01.20 (0.005-01.008) | |||
| Maximum Backlash Variation Between Points Checked - mm (inch) | 0.05 (0.002) | |||
| Rotational Torque Ranges | ||||
| Pinion Bearing Preload (New Pinion Bearings) | 1.7-31.4 Nm (15-310 lb-in) | |||
| Pinion Bearing Preload (Original Pinion Bearings) | (1) | |||
| Clearance Specifications | ||||
| Housing Spreader Adapter Bolt Thread Engagement - mm (inch) | 12.7 (0.500) | |||
| Maximum Spread Of Differential Housing - mm (inch) | 0.381 (0.015) | |||
|
||||