General Specifications
WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Lubricants & Sealants | ||
| SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL |
WSP-M2C197-A | |
| Additive Friction Modifier C8AZ-19B546-A |
EST-M2C118-A | |
| Premium Long-Life Grease XG-1-C |
ESA-M1C75-B | |
| Clear Silicone Rubber D6AZ-19562-AA |
ESB-M4G92-A | |
| Threadlock & Sealer EOAZ-19554-AA | WSK-M2G351-A5 | |
| Lubricant Fill Level Checks | ||
| Additive Friction Modifier | 118 ml (4 oz) | |
| Rear Axle Lubricant | 2.4 Liters (5.0 Pints) | |
| Rear Axle Lubricant Level | 6.4 mm (0.25 in) to 14.3 mm (0.57 in) From The Bottom Of The Fill Hole | |
| Backlash Specifications | ||
| Backlash Between Differential Ring Gear & Pinion Teeth | 0.203-0.304 mm (0.008-0.012 in) | |
| Maximum Differential Ring Gear Backlash Variation Between Teeth | 0.102 mm (0.004 in) | |
| Rotational Torque Ranges | ||
| Pinion Bearing Preload | 1.8-3.3 Nm (16-29 lb-in) | |
| Initial Minimum Breakaway Torque, Traction-Lok® | 27 Nm (20 lb-ft) | |
| Clearance Specifications | ||
| Maximum Differential Ring Gear Backface Runout | 0.102 mm (0.004 in) | |
| Maximum Differential Case Runout | 0.076 mm (0.003 in) | |
| Maximum Axle Shaft End Play | 0.762 mm (0.030 in) | |
| Maximum Pinion Runout | 0.25 mm (0.010 in T.I.R.) | |
| RABS Sensor Air Gap | 0.127-1.143 mm (0.005-0.045 in) | |