LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (Rear Drive Axle/Differential 8.8-Inch Ring Gear) >> Diagnosis & Testing >> Diagnostic Routines >> Diagnostic Routine - Noise (Clunk) On Changes In Speed Or Direction Of Power

Diagnostic Routine - Noise (Clunk) On Changes In Speed Or Direction Of Power

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC ROUTINE - NOISE (CLUNK) ON CHANGES IN SPEED OR DIRECTION OF POWER

Possible Component Reference/Action
  • Axle & Pinion System
  • Measure Total Backlash. If End Play And Total Backlash Are Within Specification, INSTALL A New Differential Case Assembly.
  • Differential Pinion Shaft
  • INSTALL A New Differential Pinion Shaft & Pin.
  • Pinion Bearings
  • INSTALL new Pinion And Differential Bearings & Bearing Cups.
scientia non olet · About LEMON Manuals