General Specifications
WARNING: This page is about a different car, the 2002 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricant | |
| Ford Multi-Purpose Grease D0AZ-19584-AA | ESB-M1C93-B |
AUTOMATIC TRANSMISSION GENERAL SPECIFICATIONS
| Item | Specification | |||
|---|---|---|---|---|
| Automatic Transmission | ||||
| Refill Capacity Liters (Quarts) | 13.2 (13.9) Motorcraft MERCON® V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON® V. MERCON V® is not interchangeable at this time with the current MERCON® service fluids. Check the transmission dipstick to determine the correct fluid and refer to the Workshop Information/Owner publication to determine the correct service interval for the specific vehicle. |
|||
| Fluid Filter | ||||
| Inline Transmission Fluid Filter Kit | XC3Z-7B155-AA | |||
| Inline Transmission Fluid Filter | XC3Z-7B155-AB | |||
| Torque Converter | ||||
| Stall Speed | ||||
| Engine | Min | Max | ||
| 5.4L HD | 1,800 | 2,150 | ||
| 5.4L | 1,806 | 2,187 | ||
| 4.6L | 2,115 | 2,426 | ||
| 4.2L HD | 2,019 | 2,355 | ||
| 4.2L | 1,984 | 2,325 | ||
| End Play | ||||
| New or rebuilt mm (inch) | 0.355-1.04 (0.014-0.041) | |||
| Used mm (inch) | 0.355-1.87 (0.014-0.074) | |||
| Forward Clutch Pack | ||||
| (4.2L, 4.6L, 5.4L) clearance mm (inch) | 1.16-1.72 (0.046-0.068) | |||
| Snap ring thickness mm (inch) | 1.524-1.625 (0.060-0.064) 1.880-1.981 (0.074-0.078) 2.235-2.337 (0.088-0.092) 2.591-2.692 (0.102-0.106) |
|||
| Reverse Clutch Pack | ||||
| Clearance mm (inch) | 1.27-1.93 (0.050-0.076) | |||
| Snap ring thickness mm (inch) | 1.524-1.625 (0.060-0.064) 1.880-1.981 (0.074-0.078) 2.235-2.337 (0.088-0.092) 2.591-2.692 (0.102-0.106) |
|||
| Direct Clutch Pack | ||||
| Clearance mm (inch) | 1.5748-21.59 (0.062-0.85) | |||
| Snap ring thickness mm (inch) | 1.270-1.372 (0.050-0.054) 1.625-1.727 (0.064-0.068) 1.981-2.083 (0.078-0.082) 2.337-2.438 (0.092-0.096) |
|||
| Intermediate Clutch Pack | ||||
| Clearance mm (inch) | 41.7322-42.5958 (1.643-1.677) | |||
| Selective steel plate mm (inch) | 1.702-1.803 (0.067-0.071) 1.956-2.057 (0.077-0.081) 2.210-2.311 (0.087-0.091) 2.464-2.565 (0.097-0.101) |
|||
| Selective Thrust Washer - No. 1 | ||||
| Green thickness mm (inch) | 1.217-1.371 (0.050-0.054) | |||
| Yellow thickness mm (inch) | 1.727-1.828 (0.068-0.072) | |||
| Natural thickness mm (inch) | 2.159-2.260 (0.085-0.089) | |||
| Red thickness mm (inch) | 2.590-2.692 (0.102-0.106) | |||
| Blue thickness mm (inch) | 3.022-3.124 (0.119-0.123) | |||