LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 377 (Automatic Transmission - 4R100) >> Diagnosis And Testing >> Preliminary Inspection >> Fluid Condition Check

Fluid Condition Check

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the fluid level.
  2. Observe the color and the odor. The color under normal circumstances should be dark reddish, not brown or black or have a burnt odor.
  3. Hold the fluid level indicator over a white facial tissue and allow the fluid to drop onto the facial tissue and examine the stain.
  4. If evidence of solid material is found, the transmission fluid pan should be removed for further inspection.
  5. If the stain is a foamy pink color this may indicate coolant in the transmission. The engine cooling system should also be inspected at this time.
  6. If fluid contamination or transmission failure is confirmed by the sediment in the bottom of the fluid pan, the transmission must be disassembled and completely cleaned. This includes the torque converter, coolers, cooler lines and cooler bypass valve.
  7. Carry out diagnostic checks and adjustments; refer to DIAGNOSIS BY SYMPTOM .