LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 376 (Engine Cooling) >> Diagnosis And Testing >> Engine Cooling >> Thermostat-Mechanical Test

Thermostat-Mechanical Test

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the water thermostat.
  2. Check the water thermostat for seating. Hold the water thermostat up to a lighted background. Leakage of light around the thermostat valve at room temperature indicates that the water thermostat should be replaced. Some water thermostats have a small leakage notch at one location on the perimeter of the thermostat valve, which is considered normal.
  3. Immerse the water thermostat in a boiling antifreeze and water mixture.
  4. See the General Specifications chart for water thermostat opening temperatures.