LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 375 (Engine System - General Information) >> General Procedures >> Cylinder Bore - Cleaning

Cylinder Bore - Cleaning

WARNING: This page is about a different car, the 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: If these procedures are not followed, rusting of the cylinder bores may occur.
  1. Clean the cylinder bores with soap or detergent and water.
  2. Thoroughly rinse with clean water and wipe dry with a clean, lint-free cloth.
  3. Use a clean, lint-free cloth and lubricate the cylinder bores.
    • Use clean engine oil meeting Ford specification.
scientia non olet · About LEMON Manuals