LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Wheel Hubs And Bearings - Full Floating Axle - DANA) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Torque specifications are for clean, dirt- and paint-free, dry bolt and nut threads. Never use oil or grease on studs or nuts.
TORQUE SPECIFICATIONS

Description Nm Lb-Ft Lb-In
Axle shaft bolts(1), E-350 122--163 90--120 -
Axle shaft bolts(1), E-450 133 99 -
Hub nut 88--102 65--75 -
(back off 90 degrees, then retighten) 20--27 15--20 -
Maximum hub rotating torque(2) 2.3 - 20
(1) Apply a suitable thread adhesive.
(2) Final adjustment is 0 mm (0 in.) end play.