General Specifications
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B | WSL-M2C192-A |
| Ford Additive Friction Modifier C8AZ-19B546-A | EST-M2C118-A |
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B |
| Sealant | |
| Silicone Rubber D6AZ-19562-AA | ESB-M4G92-A or ESE-M4G195-A |
| Threadlock and Sealer EOAZ-19554-AA | WSK-M2G351-A5 |
| Adhesive | |
| Stud and Bearing Mount EOAZ-19554-BA | WSK-M2G349-A1 |
| Clearance, Tolerance and Adjustments | |
| Maximum back face ring gear runout | 0.102 mm (0.004 in) |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Available pinion gear shim | 0.533 mm (0.021 in) - 0.94 mm (0.037 in) |
| Backlash between ring gear and pinion teeth | 0.203 mm (0.008 in) - 0.381 mm (0.015 in) [0.305 mm (0.012 in) - 0.381 mm (0.015 in) preferred] |
| Maximum axle shaft end play | 0.762 mm (0.030 in) |
| Ring gear maximum backlash variation between teeth | 0.102 mm (0.004 in) |
| Pinion flange maximum radial runout in assembly | 0.305 mm (0.012 in) T.I.R. |
| RABS sensor air gap | 0.127 mm (0.005 in) - 1.143 mm (0.045 in) |