General Specifications
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications
| Item | Specification |
|---|---|
| SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B | WSL-M2C192-A |
| Additive Friction Modifier C8AZ-19B546-A | EST-M2C118-A |
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B |
| Sealant | |
| Silicone Rubber D6AZ-19562-AA | ESB-M4G92-A or ESE-M4G195-A |
| Threadlock® and Sealer EOAZ-19554-AA Loctite® | WSK-M2G351-A5 |
| Adhesive | |
| Stud and Bearing Mount EOAZ-19554-BA | WSK-M2G349-A1 |
| Clearance, Tolerance and Adjustments | |
| Maximum backface ring gear runout | 0.102 mm (0.004 in) |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Maximum axle shaft end play | 0.762 mm (0.030 in) |
| Backlash between ring gear and pinion teeth | 0.203-0.381 mm [0.305-0.381 mm preferred] (0.008-0.015 in [0.012-0.015 in preferred]) |
| Ring gear maximum backlash variation between teeth | 0.102 mm (0.004 in) |
| Pinion maximum runout | 0.25 mm (0.010 in) T.I.R. |
| RABS sensor air gap | 0.127-1.143 mm (0.005-0.045 in) |