LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Manual Transmission & Clutch System - General Information) >> Removal And Installation >> Clutch Housing Locating Dowels >> Installation

Clutch Housing Locating Dowels: Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Care should be taken to install the dowel squarely into place until it is fully seated and to not damage the surrounding surface areas.
  1. Install the clutch housing locating dowels.
  2. Install the flywheel. For additional information, refer to CLUTCHES .
scientia non olet · About LEMON Manuals