LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Manual Transmission & Clutch System - General Information) >> General Procedures >> Flywheel Runout Check >> Flywheel Runout Check Procedure

Flywheel Runout Check Procedure

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mount the special tool so that the indicator contact point rides on the clutch disc contact surface.
  2. Rotate the flywheel and check the runout. If the runout exceeds the maximum allowance, install a new flywheel.
    Fig 1: Measuring Flywheel Runout
    G03430718Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals