LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Manual Transmission & Clutch System - General Information) >> General Procedures >> Clutch Pressure Plate Check

Clutch Pressure Plate Check

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the clutch pressure plate surface for scoring, cracks or discoloration. Minor scratches or discoloration should be removed with a fine emery cloth.
  2. Measure the flatness of the clutch pressure plate surface with a straightedge and a feeler gauge.
    Fig 1: Measuring Flatness Of Clutch Pressure Plate Surface
    G03430715Courtesy of FORD MOTOR CO.
  3. Check the diaphragm spring fingers for discoloration, scoring, bent or broken segments and spring ends that are higher or lower than the rest.
  4. Measure the wear of the diaphragm spring fingers.
    Fig 2: Measuring Wear Of Diaphragm Spring Fingers
    G03430716Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals