LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Engine - 2.0L ZETEC) >> In-Vehicle Repair >> Crankshaft Front Oil Seal >> Removal

Crankshaft Front Oil Seal: Removal

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt. For additional information, refer to TIMING BELT .
  2. Remove the crankshaft sprocket and timing belt guide.
    Fig 1: Removing Crankshaft Sprocket & Timing Belt Guide
    G03430173Courtesy of FORD MOTOR CO.
  3. CAUTION: Use care to avoid damaging the crankshaft surface.
    Fig 2: Removing Crankshaft Front Oil Seal
    G03430174Courtesy of FORD MOTOR CO.
  4. Using the special tool, remove the crankshaft front seal from the oil pump.