LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Engine - 2.0L ZETEC) >> In-Vehicle Repair >> Camshaft Oil Seal >> Installation

Camshaft Oil Seal: Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The exhaust camshaft oil seal is shown, the intake seal is similar.
    Fig 1: Installing Camshaft Front Oil Seals
    G03430271Courtesy of FORD MOTOR CO.
  1. Using the special tool, install new camshaft front oil seals.
  2. Install the camshaft timing sprockets. For additional information, refer to TIMING DRIVE COMPONENTS - TIMING SPROCKETS .