LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Valve Seals >> Removal

Valve Seals: Removal

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve spring. Refer to VALVE SPRING .
  2. NOTE: Camshaft removed for clarity.
    Fig 1: Removing Valve Seal
    G03429753Courtesy of FORD MOTOR CO.
  3. Remove the valve seal.