LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Valve Seals >> Installation

Valve Seals: Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Lubricate the valve guide with clean engine oil.
  1. Using the special tool, install the valve seal.
    Fig 1: Installing Valve Seal
    G03429754Courtesy of FORD MOTOR CO.
  2. Install the valve spring. Refer to VALVE SPRING .
scientia non olet · About LEMON Manuals