LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Crankshaft Rear Oil Seal >> Installation

Crankshaft Rear Oil Seal: Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Clean all sealing surfaces with metal surface cleaner.
    NOTE: Lubricate the crankshaft rear oil lips with clean engine oil.
    Fig 1: Installing Crankshaft Rear Oil Seal
    G03429814Courtesy of FORD MOTOR CO.
  1. Using the special tools, install the crankshaft rear oil seal.
  2. Install the flexplate. For additional information, refer to FLEXPLATE .
scientia non olet · About LEMON Manuals