Camshaft - Lobe Surface
WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
- If excessive pitting or damage is present, install new components as necessary. For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .