LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Steering Column Switches) >> Diagnosis And Testing >> Steering Column Switches >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the ignition switch and the multifunction switch.
  2. Visually inspect the ignition switch and the steering column multifunction switch for damage; refer to the following chart:

    Visual Inspection Chart 

    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Ignition switch
    • Turn signal switch (part of the steering column multifunction switch)
    • Hazard flasher switch
    • Wiper/washer switch
    • Connections
    • Battery junction box (BJB) fuse
      • MAIN (120A)
      • 19 (40A)
      • 20 (40A)
    • Central junction box (CJB) fuse IG KEY
      • 11 (10A)
    • Circuitry
  3. If binding occurs, turn the steering wheel left or right to release any pressure on the ignition switch and make sure the ignition key is cut correctly.
  4. If the cause of the switch concern is not visually evident, proceed to the Symptom Chart.
scientia non olet · About LEMON Manuals