Steering System
WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The power steering system has a typical rack-and-pinion design consisting of the following components:
- Power Steering Fluid Reservoir
- Power Steering Pump
- Steering Gear
- Fluid Cooler
- Fluid Lines
- Tie Rods
- Steering Column
For information on the power steering pump reservoir (3E764), refer to POWER STEERING .
For information on the steering wheel and column assembly, refer to STEERING COLUMN .
For information on the power steering fluid lines, refer to POWER STEERING .
For information on the power steering pump (3A674), refer to POWER STEERING .
For information on the steering gear (3504), refer to POWER STEERING .
For information on the tie rod end (3A130), refer to POWER STEERING .
For information on the power steering fluid cooler (3D746), refer to POWER STEERING .