LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Vehicle Speed Sensor (VSS) >> Removal

Vehicle Speed Sensor (VSS): Removal

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable.
  2. Raise and support the vehicle. .
  3. Remove the vehicle speed sensor (VSS).
    1. Disconnect the electrical connector.
    2. Remove the bolt.
    3. Remove the VSS.
      Fig 1: Removing Bolt
      G03412252Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals