Torque Converter Operation Concern: Always Applied/Stalls Vehicle

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE CONVERTER OPERATION CONCERN: ALWAYS APPLIED/STALLS VEHICLE SPECIFICATION

Possible Component	Reference/Action
234 - ELECTRICAL ROUTINE
Powertrain Control System
Electrical inputs/outputs, vehicle wiring harnesses, transaxle control module (TCM), TCC solenoid, internal wiring harness	Perform Torque Converter Clutch Operation Test; refer to the PRELIMINARY INSPECTION procedure . Run on-board diagnostic. Refer to SELF-DIAGNOSTICS for diagnosis.
334 - HYDRAULIC/MECHANICAL ROUTINE
Main Control Valve Body
Bolts out of torque specification	Tighten bolts to specification.
Gaskets and separator plate-damaged, off location	Inspect gaskets. Install new components as necessary.
TCC Solenoid-not functioning properly	Inspect. Install new components as necessary.
Converter
No end clearance to turbine	Check torque converter end play; refer to END PLAY CHECK .