Shift Concerns: Some Or All Shifts Missing

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

SHIFT CONCERNS: SOME OR ALL SHIFTS MISSING SPECIFICATION

Possible Component	Reference/Action
208 - ELECTRICAL ROUTINE
Powertrain Control System
Electrical inputs/outputs, vehicle wiring harnesses, transaxle control module (TCM), shift solenoids, digital TR sensor, internal wiring harness.	Run on-board diagnostic. Refer to SELF-DIAGNOSTICS for diagnosis.
308 - HYDRAULIC/MECHANICAL ROUTINE
Fluid
Improper level	Adjust fluid to proper level.
Condition	Inspect; refer to FLUID CONDITION CHECK .
Shift Linkage (Internal/External)
Damaged, out of adjustment	Inspect and repair as required. Verify linkage adjustment; refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS . After servicing linkage, verify that the digital TR sensor is properly adjusted; refer to DIGITAL TRANSMISSION RANGE (TR) SENSOR .
Planetary Gear Sets
Damaged	Inspect for damage. Install new components as necessary.
Other Components
Clutches	Inspect for damage. Install new components as necessary.
Output shafts (differential)	Inspect for damage. Install new components as necessary.
2-4 band	Inspect for damage. Install new components as necessary.
Power flow components	Inspect for damage. Install new components as necessary. Go to Reference/Action Shift concern: No 1-2-Routine 220/320 Shift concern: No 2-3-Routine 221/321 Shift concern: No 3-4-Routine 222/322 Shift concern: No 4-3-Routine 223/323 Shift concern: No 3-2-Routine 224/324 Shift concern: No 2-1-Routine 225/325