LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Automatic Transaxle/Transmission) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Shift Concerns: No 3-4 Shift (Automatic)

Shift Concerns: No 3-4 Shift (Automatic)

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT CONCERNS: NO 3-4 SHIFT (AUTOMATIC) SPECIFICATION

Possible Component Reference/Action
217 - ELECTRICAL ROUTINE 
Powertrain Control System 
  • Electrical inputs/outputs, vehicle wiring harnesses, transaxle control module (TCM), shift solenoid 2, internal wire harness
317 - HYDRAULIC/MECHANICAL ROUTINE 
2-4 Band 
 
  • Inspect for damage. Install new components as necessary.
Main Control Valve Body 
  • Bolts out of torque specification
  • Tighten bolts to specification.
  • Gaskets and separator plate-damaged, off location
  • Inspect for damage. Install new components as necessary.
2-4 Servo Piston Assembly 
  • Piston seals-missing, damaged
  • Inspect for damage. Install new components as necessary.
  • Inspect for damage. Install new components as necessary.
Solenoid Reducing Valve 
 
  • Inspect for damage. Install new components as necessary.
scientia non olet · About LEMON Manuals