Engagement Concern: No Forward

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

ENGAGEMENT CONCERN: NO FORWARD SPECIFICATION

Possible Component	Reference/Action
201 - ELECTRICAL ROUTINE
Powertrain control system
No electrical concerns	Check for a low transmission fluid level, then continue to Hydraulic/Mechanical Routines.
301 - HYDRAULIC/MECHANICAL ROUTINE
Shift linkage
Damaged or out of adjustment	Inspect and repair as required. Verify linkage adjustment; refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS . After servicing linkage, verify digital (TR) sensor is properly adjusted; refer to DIGITAL TRANSMISSION RANGE (TR) SENSOR .
Improper pressures
Low forward clutch pressure, low line pressure	Perform Line Pressure Tests and Stall Speed Tests. Refer to the LINE PRESSURE CHART for specification. If pressures are low, check the following possible components: main control valve body pump assembly
Main Control Valve Body
Bolts out of torque specification	Adjust bolts to specification.
Gaskets and separator plate damaged, off location	Inspect gaskets for damage. Install new components as necessary.
Manual control valve damaged	Inspect. Install new components as necessary.
Pump Assembly
Bolts out of torque specification	Adjust bolts to specification.
Gaskets and separator plate damaged, off location	Inspect for damage. Install new components as necessary.
Porosity/cross leaks/ball missing or leaking	Inspect for porosity and leaks. Install new components as necessary.
Components damaged	Inspect for damage. Install new components as necessary.
Forward Clutch Assembly
Seals, piston-damaged	Carry out air pressure check; refer to DIAGNOSTICS .
Friction elements-damaged, clearance incorrect	Inspect. Install new components as necessary.