LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 347 (Safety Belt System) >> Removal And Installation >> Safety Belt - Rear 3-Passenger Bench Seat >> Removal

Safety Belt - Rear 3-Passenger Bench Seat: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Safety Belt Bolt Torx Bit to remove the LH rear bolt and safety belt buckle.
    Fig 1: Removing LH Rear Bolt And Safety Belt Buckle
    G01441877Courtesy of FORD MOTOR CO.
  2. Remove the LH rear safety belt buckle assembly.
    Fig 2: Removing LH Rear Safety Belt Buckle Assembly
    G01441878Courtesy of FORD MOTOR CO.
  3. Use the Safety Belt Bolt Torx Bit to remove the RH rear safety belt and buckle bolt.
    Fig 3: Removing RH Rear Safety Belt And Buckle Bolt
    G01441879Courtesy of FORD MOTOR CO.
  4. Remove the RH rear safety belt buckle and tongue assembly.
Fig 4: Removing RH Rear Safety Belt Buckle And Tongue Assembly
G01441880Courtesy of FORD MOTOR CO.