LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 346 (Wiper System And Washer System) >> Removal And Installation >> Mounting Arm and Pivot Shaft >> Installation

Mounting Arm and Pivot Shaft: Installation

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    Fig 1: Locating Fasteners With Torque Specifications
    G01441799Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals