LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 345 (Instrument Panel & Console) >> Removal And Installation >> Floor Console >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the high series console, remove the storage bin.
    • Release the locking tabs and remove the storage bin.
    Fig 1: Removing Storage Bin
    G01441257Courtesy of FORD MOTOR CO.
  2. Remove the floor console.
    • Through the floor console opening, push and hold the locking clip while lifting upward.
    Fig 2: Removing Floor Console
    G01441258Courtesy of FORD MOTOR CO.
  3. NOTE: When installing the floor console, be sure the locking clip is fully engaged
  4. To install, reverse the removal procedure.