Removal and Installation
WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the appropriate rear bench or bucket seat.
- Remove the bolts and washers retaining the rear seat back latch striker to the floorpan.
- For the extended wagon fifth row bench seat, remove the retaining nuts (not shown).
- Remove the rear seat back latch striker.
- To install, reverse the removal procedure.
NOTE:
The following procedure applies to both rear bucket and rear bench seats
The removal procedure is similar for all of the rear seat latch strikes (6244)
The removal procedure is similar for all of the rear seat latch strikes (6244)