Removal & Installation
WARNING: This page is about a different car, the 2002 Lincoln Navigator, 2002 Lincoln Blackwood, 2002 Ford Pickup, and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Remove fuel tank. See FUEL TANK . Remove screws or lock ring and fuel pump tank unit. Wipe seal area of tank clean. Position NEW seal onto pump mounting flange (if necessary), using grease to hold it in position. Position fuel pump in tank to original position. Install bolts or lock ring. DO NOT overtighten lock ring, as it may leak. Install fuel tank. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .