LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Engine Controls - Removal, Overhaul & Installation - BLACKWOOD, Expedition, F150 Pickup & Navigator - Gasoline) >> Air Induction Systems >> Intake Manifold >> Installation

Intake Manifold: Installation

WARNING: This page is about a different car, the 2002 Lincoln Navigator, 2002 Lincoln Blackwood, 2002 Ford Pickup, and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Install gaskets and upper intake manifold. Tighten upper intake manifold bolts in sequence to specification. See Fig 1. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.

Fig 1: Upper Intake Manifold Tightening Sequence (4.2L)
G00132434Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals