LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 (Instrument Cluster & Panel Illumination) >> Diagnosis And Testing >> Instrument Cluster and Panel Illumination >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the instrument illumination.
  2. Visually inspect for the following obvious signs of electrical damage.

    VISUAL INSPECTION CHART 

    Fig 1: Visual Inspection Chart
    G01439973Courtesy of FORD MOTOR CO.

    ELECTRICAL 

    • Blown fuse(s)
    • Damaged wiring harness
    • Loose or corroded connections
    • Circuitry
    • Bulb(s)
  3. If the fault is not visually evident, determine the symptom and proceed to Symptom Chart.