LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (HVAC System - Heating & Ventilation) >> Removal And Installation >> Heater Hose >> Removal

Heater Hose: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. For additional information, refer to ENGINE COOLING .
  2. Disconnect the quick disconnect heater hose couplings at the heater core (18476). For additional information, refer to CLIMATE CONTROL SYSTEM-GENERAL INFORMATION .
    Fig 1: Disconnecting Quick Disconnect Heater Hose Couplings At Heater Core
    G01452816Courtesy of FORD MOTOR CO.
  3. Remove the engine cover.
  4. Disconnect the supply heater water hose (18472) at the engine.
    Fig 2: Disconnecting Supply Heater Water Hose At Engine
    G01452817Courtesy of FORD MOTOR CO.
  5. Disconnect the return heater water hose at the engine.
    Fig 3: Disconnecting Return Heater Water Hose At Engine
    G01452818Courtesy of FORD MOTOR CO.
  6. NOTE: This step must be performed if the vehicle is equipped with an auxiliary A/C-heater system.
    Fig 4: Disconnecting Quick Disconnect Heater Hose Couplings From Heater Water Hoses
    G01452819Courtesy of FORD MOTOR CO.
  7. Disconnect the quick disconnect heater hose couplings from the heater water hoses. For additional information, refer to CLIMATE CONTROL SYSTEM-GENERAL INFORMATION .
  8. Remove the heater water hoses.