LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 330 (Fuel Tank & Lines-Natural Gas) >> Removal And Installation >> Sensor - Tank Temperature >> Installation

Sensor - Tank Temperature: Installation

WARNING: This page is about a different car, the 2003 Ford Econoline, 2003 Ford E550 Super Duty, and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to learn the strategy.
    NOTE: Replace the tank temperature sensor O-ring seal.
    NOTE: Lubricate the tank temperature sensor O-ring seal with Super Premium 5W-30 engine oil meeting Ford specification WSS-M2C153-F or equivalent prior to installation, to help seal and ease the installation.
    Fig 1: Tank Temperature Sensor Torque Specification
    G01540263Courtesy of FORD MOTOR CO.
  1. Follow the removal procedure in reverse order.