Lines - Rear High-Pressure Fuel: Removal

WARNING: This page is about a different car, the 2003 Ford Econoline, 2003 Ford E550 Super Duty, and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Perform the pressure relief - fuel line venting procedure. For additional information, refer to FUEL SYSTEM-GENERAL INFORMATION-NATURAL GAS .
Disconnect the rear high-pressure fuel line from the mid high-pressure fuel line.

Fig 1: Disconnecting Rear High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.
Disconnect the rear high-pressure fuel line from the midship fuel tank solenoid valve.

Fig 2: Disconnecting Rear High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.
Remove the P-clip and line clamp retaining bolts.

Fig 3: Removing P-Clip And Line Clamp Retaining Bolts
Courtesy of FORD MOTOR CO.
Remove the rear high-pressure fuel line.
1. Disconnect the rear high-pressure fuel line from the forward aft-axle fuel tank solenoid valve.
2. Remove the P-clip retaining bolt.
3. Remove the rear high-pressure fuel line from the vehicle.
Fig 4: Removing Rear High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.