LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Controls - Theory & Operation - Gasoline & NGV) >> EGR Systems >> Differential Pressure Feedback EGR System >> Differential Pressure Feedback EGR Sensor (Remote Mounted)

Differential Pressure Feedback EGR Sensor (Remote Mounted)

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2002 Mercury Sable, 2002 Mercury Mountaineer, 2002 Mercury Grand Marquis, 2002 Mercury Cougar, and 2002 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Differential Pressure Feedback (DPFE) EGR sensor is a ceramic, capacitive type pressure transducer that monitors differential pressure across a metering orifice located in orifice tube assembly. DPFE EGR sensor receives this signal through 2 hoses referred to as downstream pressure hose (REF), and upstream pressure hose (HI). HI and REF hose connections are marked on aluminum DPFE EGR sensor housing for identification. Note that HI uses a larger diameter hose. DPFE EGR sensor outputs a voltage proportional to pressure drop across metering orifice and supplies it to PCM as EGR flow rate feedback. See Fig 1.

Fig 1: Identifying Remote Mounted DPFE EGR Sensors
G00096647Courtesy of FORD MOTOR CO.