LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Controls - Theory & Operation - Gasoline & NGV) >> Computerized Engine Controls >> Input Devices >> Power Take-Off Switch

Power Take-Off Switch

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2002 Mercury Sable, 2002 Mercury Mountaineer, 2002 Mercury Grand Marquis, 2002 Mercury Cougar, and 2002 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Power Take-Off (PTO) circuit is used by PCM to disable some OBD-II monitors during PTO operation. PTO switch is normally open and circuit voltage is normally low. When PTO switch is closed, battery voltage is supplied to PTO circuit, indicating an additional load condition to PCM. If an additional load condition is not reported to PCM by PTO circuit, a false DTC may be stored.

scientia non olet · About LEMON Manuals