LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Automatic Transmission - 4R70W) >> Disassembly And Assembly Of Subassemblies >> Intermediate One-Way Clutch >> Assembly

Intermediate One-Way Clutch: Assembly

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The intermediate one-way clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.
  1. Install the intermediate one-way clutch.
    1. Install the intermediate one-way clutch.
    2. Install the snap ring.
      Fig 1: Installing Intermediate One-Way Clutch
      G01539862Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals