LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Automatic Transmission - 4R70W) >> Diagnosis And Testing >> Diagnostic Strategy >> Vehicle Speed (VSS) Sensor

Vehicle Speed (VSS) Sensor

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The source of vehicle speed (VSS) is model dependent. Possible sources of vehicle speed input are anti-lock brake sensor (ABS), a gear-driven vehicle speed sensor (VSS), or an output shaft speed sensor (OSS). The VSS signal is either an A/C signal whose frequency changes with speed, or an SCP data message depending on the source. Some applications will have both. The vehicle speed signal is an input to various vehicle subsystems such as the powertrain control module (PCM), instrument cluster (speedometer and odometer), speed control system, etc. The vehicle speed source must be operational to enter output state control (OSC) mode for diagnostics.

Regardless of the type of vehicle speed system, the PCM always uses the OSS for transmission and engine control.

To properly diagnose a concern have the following available:

Use the Diagnostic Flow Chart as a guide and follow the steps as indicated.