LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine - 4.2L) >> In-Vehicle Repair >> Oil Pump Screen and Pickup Tube >> Installation

Oil Pump Screen and Pickup Tube: Installation

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil pump screen cover and pickup tube. Use a new gasket.
    Fig 1: Installing Oil Pump Screen
    G01535968Courtesy of FORD MOTOR CO.
  2. Install the oil pan. For additional information, refer to OIL PAN .
scientia non olet · About LEMON Manuals