Sensor - Front, 4x2: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the front anti-lock brake sensor electrical connector.

Fig 1: Disconnecting Front Anti-Lock Brake Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
Separate the sensor cable from the brake hose clips.

Fig 2: Separating Sensor Cable From Brake Hose Clips
Courtesy of FORD MOTOR CO.
Remove the (A) front anti-lock brake sensor bolt and the (B) front anti-lock brake sensor.

Fig 3: Removing Front Anti-Lock Brake Sensor Bolt And Front Anti-Lock Brake Sensor
Courtesy of FORD MOTOR CO.