General Specifications
WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Rear Drive Axle/Differential - Ford 9.75-Inch Ring Gear General Specifications
| Item | Specification |
|---|---|
| SAE75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B | WSL-M2C192-A |
| Additive Friction Modifier C8AZ-19B546-A | EST-M2C118-A |
| Premium Long-life Grease XG-1-C | ESA-M1C75-B |
| Sealant | |
| Silicone Rubber D6AZ-19562-AA | ESB-M4G92-A or ESE-M4G195-A |
| Threadlock and Sealer EOAZ-19554-AA | WSK-M2G351-A5 |
| Adhesive | |
| Stud and Bearing Mount EOAZ-19554-BA | WSK-M2G349-A1 |
| Clearance, Tolerance and Adjustments | |
| Maximum back face differential ring gear runout | 0.102 mm (0.004 in.) |
| Differential case maximum runout | 0.076 mm (0.003 in.) |
| Available pinion gear shim | 0.533-0.94 mm (0.021-0.037 in.) |
| Backlash between differential ring gear and pinion teeth | 0.20-0.38 mm (0.008-0.015 in.) maximum 0.305-0.381 mm (0.012-0.015 in.) preferred |
| Maximum axle shaft end play | 0.762 mm (0.030 in.) |
| Differential ring gear maximum backlash variation between teeth | 0.102 mm (0.004 in.) |
| Rear axle pinion flange maximum radial runout in assembly | 0.305 mm (0.012 in. T.I.R.) |
| RABS sensor air gap | 0.127-1.143 mm (0.005-0.045 in.) |